Drag Car Wheel Alignment, DIY Carbon Fiber and More | Recently at RaceCraft [UPDATE 012]

Carbon fiber oil cooler ducting, wheel alignment tips and coil upgrade update, this is what we've been up to recently at RaceCraft.

This is the [UPDATE] which came before RaceCraft webinar '012 | Introduction to VBOX Logging’, details on membership below.

While it's more likely you're going to apply this to something like a drag car, just in case you want to make sure the old CLAAS is hammering down the tractor pull lane on point to, Tim runs us though what to do when we have different rim or hub sizes from front to rear.

We also take a look at the SR20VET coil upgrade and where things are at with the rocker cover changes.

0:00 - Intro
0:18 - SR20VET Rocker Cover Coil Mod
4:28 - Oil Cooler Ducting
7:00 - DIY Carbon Fiber
8:04 - Captured Nuts/Nut Plate
10:14 - Post: "String setup Front and Rear Different OD"
15:12 - Course Update
15:55 - Learn More

WEBINAR INFO: The VBOX logging system from RaceLogic is extremely widely used, particularly in high end sports car and endurance racing. In this webinar, we’ll take a look at the architecture and use of the system to see why it is so widely used.

 

Want to learn more about tuning?

We've helped 30,000 people just like you learn the science of tuning and apply it to their own projects.

Interested in learning more? Check out these courses

Comments

No one has commented on this page yet.