Let's learn how to make input, output and tuning changes using the MaxxECU MTune tuning software platform.
This is an introductory look at the MaxxECU Race ECU and their MTune software interface. Most of what you're going to see today is going to work, irrespective of which particular MaxxECU you're interested in.
You can find a complete worked example in the Practical Standalone Tuning course that goes much deeper into how to tune using this and various other platforms. However, this will still give you a solid look into the MaxxECU platform.
We're using HPA's staff project car, a B18C swapped Honda City club racer, for this example, but the knowledge is not limited to just this one vehicle at all. The vehicle is also equipped with a MaxxECU PDM20, covered in another lesson that HPA members can access in their webinar archive.
------------------------------------
TIME STAMPS:
0:00 - Introduction
0:43 - Vehicle Overview
2:50 - Software basics
5:45 - Tables
11:08 - Moving between table shortcut keys
12:19 - Manipulating fuel table values
14:35 - Real-time values
16:47 - Configuration Menu
19:51 - Limits Menu
23:08 - Fuel Menu
26:46 - Ignition Menu
28:27 - Idle Control Menu
30:58 - Motorsport Menu
31:14 - Speed/Gear Menu
31:29 - CANBus Menu
33:55 - PDM Menu
34:42 - Inputs Menu
37:35 - Outputs Menu
38:39 - Diagnostics Menu
41:28 - Tuning Menu
45:28 - Autotune
46:41 - Questions
Comments
No one has commented on this page yet.