Sale ends todayGet 30% off any course (excluding packages)
Ends in --- --- ---
Forum Posts
Courses
Blog
Tech Articles
Hello,
I have a 1.8turbo 20valves engine running EMU Black - with 4 x bosch 980 cc as primary injectors and 4 x bosch 2200 cc as secondary injectors
currently i have enable the Second fuel line and assing the coresponding output of the 2200 cc injectors,
i have set up the VE table 2 for the 2200cc inejctors
car is running very good
the only problem i have notice is the Secondary INJ Duty is around 80% with 6.02 ms injection time.
what will happend if i need more injection on second fuel rail ?
car is running E100 fuel and around 3.3 bar boost
thanks!
Attached Files
emu-black.png
