Sale ends todayGet 30% off any course (excluding packages)
Ends in --- --- ---
Forum Posts
Courses
Blog
Tech Articles
I'm currently tuning a 2024 Can Am Maverick R w/ MG1 ECU and have never seen the values that are in the pressure ratio table 45559 expressed in w/hpa/k.
I don't currently need to make any change to the pressure ratio or modeled turbo speed, but curiosity has the best of me and I'd love to know exactly what these values represent. Is this an actual representation of the power output of the turbo or flow?
I have attached a screenshot below as well as the stock tune file.
Thanks
Attached Files
SpencerPrice2024MaverickRStock.hpt
- TurboSpeed_PressureRatio.jpg
Maybe Andre can chime in?
Bump
Hi,
The MG1 is quite complicated.
MG1 complexity: Consider using WinOls with A2L file to understand parameter descriptions. Seems like the system calculates & looks up values in the turbo characteristic map to find the compressor pressure ratio and the outher way, effectively plotting a point on the compressor map.
